LM6134 Dual and Quad Low Power 10 MHz Rail-to-Rail I/O Operational Amplifier
DESCRIPTION: The LM6132/34 provides new levels of speed vs. power
performance in applications where low voltage supplies or
power limitations previously made compromise necessary.
With only 360 uA/amp supply current, the 10 MHz gainbandwidth
of this device supports new portable applications where higher power devices unacceptably drain battery life.
The LM6132/34 can be driven by voltages that exceed both
power supply rails, thus eliminating concerns over exceeding
the common-mode voltage range. The rail-to-rail output
swing capability provides the maximum possible dynamic
range at the output. This is particularly important when operating
on low supply voltages. The LM6132/34 can also
drive large capacitive loads without oscillating.
Operating on supplies from 2.7V to over 24V, the LM6132/34
is excellent for a very wide range of applications, from battery
operated systems with large bandwidth requirements to
high speed instrumentation.
FEATURES:
(For 5V Supply, Typ Unless Noted)
- Rail-to-Rail input CMVR -0.25V to 5.25V
- Rail-to-Rail output swing 0.01V to 4.99V
- High gain-bandwidth, 10 MHz at 20 kHz
- Slew rate 12V/us
- Low supply current 360 uA/Amp
- Wide supply range 2.7V to over 24V
- CMRR 100 dB
- Gain 100 dB with RL = 10k
- PSRR 82 dB
APPLICATIONS:
- Battery operated instrumentation
- Instrumentation Amplifiers
- Portable scanners
- Wireless communications
- Flat panel display driver
These are new and unused -- very nice.
